Product Images

Recycling Of Pet Bottles As Fine Aggregate In Concrete

Recycling Of PET Bottles As Fine Aggregate In Concrete

An attempt to substitute in concrete the by weight of fine aggregate (natural sand) with an equal weight of PET aggregates manufactured from the waste un-washed PET bottles

Waste Polyethylene Terephthalate As An Aggregate In

Research Print version ISSN 1516-1439 Recycling plastic waste to produce new materials like aggregate in concrete could be one of the best solutions for disposing of it, given its economic and ecological advantages. Frigione M. Recycling of PET bottles as fine aggregate in concrete. Waste

(PDF) Concrete With Recycled Glass As Fine

Concrete with Recycled Glass as Fine Aggregates The effect of waste glass as fine aggregate in concrete mixes was investigated at nano-level by using

Manufacturing Light Concrete With PET

The manufacture of concrete using a polymer instead of a stony coarse aggregate known as gravel is presented. Polyethylene terephthalate (PET) is the polymer used, recycling soft drink containers with sufficient tenacity. PET is a material commonly used by engineers as a structural element, not as an aggregate. The research work revealed that PET aggregate produces good quality mixtures

An Investigation On Fresh And Hardened Properties Of

plastic coarse aggregate (PCA) and plastic fine aggregate (PFA) were produced from melted polyethylene terephthalate (PET) bottles. Tests were conducted using three different ratios, such as 0.42, 0.48, and 0.57, where PCA and PFA were used as replacement of coarse and fine aggregate

An Investigation On The Use Of Shredded Waste PET Bottles

An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete. This method provides both recycling of the plastic waste and production of a lightweight concrete in an D.-J. Moon, J.-S. Chung, S.-K. ChoEffects of waste PET bottles aggregate on the properties of concrete. Cement and Concrete Research, 35

The Use Of Plastic Waste As Fine Aggregate In The Self

This paper has presented the recycling and the use of plastic wastes (PET used for the bags manufacture) as fine aggregate in self-compacting mortars. The results which could be summarized and concluded This plastic waste type can be used successfully as a fine aggregate in self-compacting mortars (or concrete).

Effects Of Waste PET Bottles Aggregate On The Properties

Then, waste PET bottles were insured to recycling as lightweight aggregates to reduce the rework cost. However, results have been far from satisfactory. If waste PET bottles were reused as lightweight aggregates for concrete, positive effects are expected on the recycling of waste resources and the protection of environmental

Use Of Waste Plastic In Concrete Mixture As Aggregate

Use of waste plastic in concrete mixture as aggregate replacement waste aggregate recycling has gained special interest among the researchers as it reduces the environmental burden due to

Use Of Waste Plastic In Concrete Mixture As Aggregate

The results proved the arrest of the propagation of micro cracks by introducing waste plastic of fabriform shapes to concrete mixtures. This study insures that reusing waste plastic as a sand-substitution aggregate in concrete gives a good approach to reduce the cost of materials and solve some of the solid waste problems posed by

Manufacturing Light Concrete With PET

The manufacture of concrete using a polymer instead of a stony coarse aggregate known as gravel is presented. Polyethylene terephthalate (PET) is the polymer used, recycling soft drink containers with sufficient tenacity. PET is a material commonly used by engineers as a structural element, not as an aggregate. The research work revealed that PET aggregate produces good quality mixtures

Effect Of Plastic Waste As Partial Replacement Of Fine

The scope of this project is to ascertain ability of using the waste PET bottles as a partial replacement agent for fine aggregate in concrete with and replacement of PET bottle fibers for fine aggregate are produced and compared against control mix with no replacement PET, flakes, fibers, waste.

Characteristics Of Mortar And Concrete Containing Fine

Characteristics of mortar and concrete containing fine aggregate manufactured from recycled waste polyethylene terephthalate bottles Construction and Building Materials ABSTRACT This paper presents the development of lightweight aggregate concrete using fine aggregate that is manufactured from recycled waste polyethylene terephthalate (PET

PET BOTTLE WASTE AS A SUPPLEMENT TO CONCRETE

Cement and concrete research, 35, pp Dora Foti., (2011), Preliminary analysis of concrete reinforced with waste bottles PET fibers, Construction and building materials, 25, pp 1906-1915. Frigione. M. Recycling of PET bottles as fine aggregate in concrete. Waste management, 2010, 20,

Experimental Investigation On The Properties Of Concrete

PET bottles as the partial replacement of aggregate in Portland cement. Concrete with and PET bottle fibres for fine aggregate were produced and compared against control mix with no replacement. Cube specimens, cylinder specimens and prism specimens of 18 numbers each were cast, cured and tested for 7 day and 28 days

USE OF WASTE PLASTIC AS FINE AGGREGATE SUBSTITUTE

in this study M20 cement concrete is considered in which the recycled plastic waste is used as the replacement of fine aggregate in the concrete. Concrete cube and beam were casted taking to of plastic as partial replacement of fine aggregate and tested for 28 days of compressive strength and flexural strength of concrete.

Waste Polyethylene Terephthalate As An Aggregate In

Polyethylene Terephthalate as an Aggregate in Concrete The experimental methods used to determine various aggregate properties and results are presented in Table 3. The concrete mixes were prepared by the same method, which requires using exactly the same aggregate grading curve and concrete composition in terms of cement

Recycling Of Polyethylene Terephthalate (PET) Plastic

from its application. Furthermore, the effects of recycling PET plastic bottle wastes produced in North Central Nigeria in bituminous asphaltic concrete (BAC) used in flexible pavement construction were also evaluated. The mix design consists of penetration-grade asphaltic concrete coarse aggregate,

Experimental Investigation On The Properties Of Concrete

fine aggregate with the PET bottle fibres increases gradually with the increase in the replacement percentage but it may fall for more replacement percentage as it is somewhat same for the 4 and 6 percent. The replacement of the fine aggregate with 2percent of PET bottle fibres will be reasonable than other

Replacement Of Fine Aggregate With Plastic In

and accordingly, anything that is formed in a soft state and industry is considered as the most feasible application. Recycled plastic can be used as coarse aggregate in concrete. Choi et al. studied the use of plastic waste PET bottles as aggregates on some properties of concrete.

Replacement Of Fine Aggregate With Plastic In

and accordingly, anything that is formed in a soft state and industry is considered as the most feasible application. Recycled plastic can be used as coarse aggregate in concrete. Choi et al. studied the use of plastic waste PET bottles as aggregates on some properties of concrete.

An Investigation On Fresh And Hardened Properties Of

plastic coarse aggregate (PCA) and plastic fine aggregate (PFA) were produced from melted polyethylene terephthalate (PET) bottles. Tests were conducted using three different ratios, such as 0.42, 0.48, and 0.57, where PCA and PFA were used as replacement of coarse and fine aggregate

Feasibility Study Of Using Recyclable Polyethylene (PET

as Coarse Aggregate for Concrete Mixtures Philip Angelo California Polytechnic University San Luis Obispo, California The feasibility of using recyclable household plastics, specifically those made of polyethylene, commonly used in water and soda bottles, as a replacement for concrete coarse aggregate, was

Effect Of Plastic Waste As Partial Replacement Of Fine

both recycling and reuse. The constructiondustry these days is need of finding cost effective and reliable materials forcreasing the strength of concrete. The scope of this project is to ascertain ability of using the waste PET bottles as a partial replacement agent concrete with for fine aggregate

Waste Polyethylene Terephthalate As An Aggregate In

This paper reports the strength behaviour of concrete containing three types of recycled polyethylene terephthalate (PET) aggregate. Results are also analysed to determine the PET-aggregate\'s effect on the relationship between the flexural and splitting tensile strengths and compressive strength and to know whether the relationships between compressive strength and

Relationship Between Compressive, Splitting Tensile And

This paper describes the experimental investigation of relationship between splitting tensile strength and flexural strength with the compressive strength of concrete containing waste PET as fine aggregates replacement. Waste PET was reprocesses and used as the artificial fine aggregate at the replacement volume of and Cylindrical and prism specimens were tested

Replacement Of Coarse Aggregate By Polyethylene

Light concrete, PET plastic waste, coarse aggregate, fine aggregate, compressive strength. I.INTRODUCTION The use of Polyethylene Terephthalate (PET) for food or beverage packing is already familiar in public. After the contents are consumed, the PET plastic containers usually are directly

Polyethylene Terephthalate (P ET) Waste As Building

bottles are being experimented to act as non load bearing Waste PET aggregate, light weight concrete, structural properties, Bottle house , PET panels I. INTRODUCTION HE problem of recycling waste materials will remain one of the problems which will continue to plague the society in the near

PLASTICS USED AS COARSE AGGREGATE FOR

mixing with other variants like concrete, bitumen etc.The development of concrete with nonconventional aggregate, such as polystyrene foam wastes, HDPE, polyethylene terephthalate (PET), and other plastic materials has been investigated for use in concrete in order to improve the properties of the concrete and reduce

Use Of Recycled Plastic Water Bottles In Concrete

aggregate size 0-5 mm Coarse aggregate size 5-10 mm 0.65 Table 2 concrete mix design. 5. Concrete brick with plastic bottles The size of concrete brick with plastic bottles that is using in this study is 200mm wide by 200mm high by 400mm long. The plastic bottles will create the voids in the brick around eight bottles horizontal (500

Effect Of Plastic Waste As Partial Replacement Of Fine

both recycling and reuse. The constructiondustry these days is need of finding cost effective and reliable materials forcreasing the strength of concrete. The scope of this project is to ascertain ability of using the waste PET bottles as a partial replacement agent concrete with for fine aggregate

Valorization Of Post-consumer Waste Plastic In

An attempt to substitute in concrete the by weight of fine aggregate (natural sand) with an equal weight of PET aggregates manufactured from the waste un-washed PET bottles (WPET), is presented. The WPET particles possessed a granulometry similar to that of the substituted

STUDY OF CONCRETE DOSAGE WITH USE OF PET

OF CONCRETE DOSAGE WITH USE OF PET PARTIALLY REPLACING FINE AGGREGATE Bezerra da Silva1,a, Ana Maria Duarte John Kennedy Guedes Rodrigues3,c, Yane Coutinho Lira4,d 1 Process Engineering Ph.D student, Universidade Federal de Campina Grande- UFCG,

LITERATURE USING RECYCLED PLASTICS FOR

un-washed PET bottles (WPET) and was found to have similar workability characteristics, compressive strength, a moderay higher ductility and only a slightly lower tensile strength . Characteristics of mortar and concrete containing fine aggregate manufactured from recycled waste polyethylene terephthalate bottles Concrete

Effects Of Waste PET As Coarse Aggregate On The -

Read of waste PET as coarse aggregate on the fresh and harden properties of concrete, Construction and Building on DeepDyve, the largest online rental service for scholarly research with thousands of academic publications available at your

Polyethylene Terephthalate (P ET) Waste As Building

bottles are being experimented to act as non load bearing Waste PET aggregate, light weight concrete, structural properties, Bottle house , PET panels I. INTRODUCTION HE problem of recycling waste materials will remain one of the problems which will continue to plague the society in the near

Renan Sorato -

Definitions 1 inert granular material such as sand, gravel, crushed rock and clinker used as a main solid constituent in concrete, plaster, tarmacadam and asphalt. bottom bottom ash is part of the non-combustible residue of combustion in a fur- nace or incinerator. In an industrial context, it usually refers to coal combustion and

Re-Use Of Hospital Plastic Waste In Asphalt Mixes As

About 1.3 billion tons of waste is being generated in the world annually. This waste is a cause of various diseases. Open dumping of waste also destroys valuable agricultural land. Various researchers have beneficially used plastic waste in cement concrete and asphalt concrete in the past. This study aims at the use of aggregates, made from different types of plastic waste, as

PLASTICS USED AS COARSE AGGREGATE FOR

mixing with other variants like concrete, bitumen etc.The development of concrete with nonconventional aggregate, such as polystyrene foam wastes, HDPE, polyethylene terephthalate (PET), and other plastic materials has been investigated for use in concrete in order to improve the properties of the concrete and reduce

Literature Review On Different Plastic Waste Materials Use

and crushed to obtained plastic sand having finesse modulus of 4.7. Fine aggregate in the mix proportion of concrete was replaced with plastic bag waste sand at and whereas other concrete materials remain same for all four

Utilization Of Shredded Waste Plastic Bags To Improve

The usage of waste plastic bags (WPB) in concrete not only solve dumping crisis of WPB but also yields cost-effective concrete, which is worthy to both plastic recycling and construction industry. In this study, the influence of shredded WPB as fine aggregate on the properties of concrete

Sustainable Utilization Of Plastic Waste In Concrete Mixes

Recycling of PET bottles as fine aggregate in concrete. Waste management, 30(6), 1101-1106. Gaur, K., Arya, Jyotsana, A.K. Singh, N.K. (2020). Use of Plastic as Partial Replacement of Fine Aggregate in Fibre Reinforced Concrete. IOSR Journal of

Properties Of Concrete Made With Plastic Aggregates

Thus, recycling of plastic is essential in condition. Incorporating the waste plastics in concrete by converting them into aggregates is one of the possible solutions to consume them. In the present study, work of various authors on natural fine aggregates partially replaced with recycled plastic fine aggregates in concrete is

PAPER OPEN ACCESS Investigating The Utilisation Of Plastic

Investigating the Utilisation of Plastic Bottle as Aggregate Replacement for Concrete Block Mardiha Mokhtar1, Nor Baizura Hamid2, Masiri Kaamin3, Muhammad PET recycling consists in the transformation of bottles coarse and fine aggregate, sand and water. There are various type of admixture that can be

POLYMER CONCRETE MADE WITH RECYCLED AGGREGATES

tyres as an alternative of fine aggregate The PET (Polyethylene terephthalate) obtained by the recycling of PET bottles, is used as a resin in the polymer concrete. The polymer concrete made by addition of these material were tested on the basis of compressive strength

Renan Sorato -

Definitions 1 inert granular material such as sand, gravel, crushed rock and clinker used as a main solid constituent in concrete, plaster, tarmacadam and asphalt. bottom bottom ash is part of the non-combustible residue of combustion in a fur- nace or incinerator. In an industrial context, it usually refers to coal combustion and

Concrete Production Using Recycled Waste Plastic As

(PET) bottles and found tensile splitting strength of concrete mixtures decreased with increase in PET aggregates. Also, by (Siddique et al. 2008) tensile splitting strength of concrete mixtures decreased with the increase in PET aggregates but for a particular PET aggregate content and

EXPERIMENTAL INVESTIGATIONS ON CONCRETE WITH E

INVESTIGATIONS ON CONCRETE WITH e-PLASTIC WASTE . A.Muthadhi *, PET bottles, pallet PET plastics as fine aggregate and they the coarse aggregate of PET waste can affect the compressive strength of structural light concrete. This is

PLASTICS USED AS COARSE AGGREGATE FOR

mixing with other variants like concrete, bitumen etc.The development of concrete with nonconventional aggregate, such as polystyrene foam wastes, HDPE, polyethylene terephthalate (PET), and other plastic materials has been investigated for use in concrete in order to improve the properties of the concrete and reduce

Use Of Plastic Waste In Sand Concrete - J. Mater. Environ.

of plastic waste in sand concrete M. Guendouz1, F. Debieb1*, O cutting of lateral sides of PET bottles. The bottlenecks and the bottom of the bottles were discarded. reported an increase in the slump value of concrete with increasing content of two types of treated PET-bottle aggregate in concrete. The aggregates were spherical in

Green Pavement Using Recycled Polyethylene Terephthalate

Boutemeur et al., have investigated the usage of PET as aggregate for concrete The usage of waste PET granules pellet was experimented as a partial fine aggregate replacement in asphalt mixture The size of this material is 3mm. The asphalt mixture was produced from penetration grade bitumen and 12.5mm aggregate

POLYMER CONCRETE MADE WITH RECYCLED AGGREGATES

tyres as an alternative of fine aggregate The PET (Polyethylene terephthalate) obtained by the recycling of PET bottles, is used as a resin in the polymer concrete. The polymer concrete made by addition of these material were tested on the basis of compressive strength

CHARACTERISATION OF RECYCLED POLYETHYLENE

terephthalate (PET) as partial fine aggregate replacement in asphalt mixtures for road pavements by determining the rutting, fatigue and stiffness properties. The percentage of recycled PET replace fine aggregate in asphalt mixture start up and bitumen content start from 4 to of weight of asphalt

PET Concrete As Paver AIP Conference Proceedings

bottle waste was chosen because it is being thrown after single use and cause environmental problem. This PET concrete then will be applied as a paver block for pedestrian walk. To reduce waste PET, the PET bottles was recycled and used in concrete mixture as a fine aggregate. PET bottles was cleaned and grinded into small irregular

Use Of Waste Plastic Aggregate As Partial Replacement Of

Lastly, we strongly conclude the use of Recycled plastic aggregate in concrete which is the best option for the disposal of plastic ultimay reduces the plastic pollution in the Environment. REFERENCES Frigione M., of PET bottles as aggregate in Waste Management 30 (2010),

Reuse Of Hospital Plastic Waste In Concrete As A Partial

of Plastic in concrete stands suitable here are intended for the making of of PET bottles as fine in Waste Management 30 (2010), Ismail Z.Z., AL-Hashmi E.A., of waste plastic in concrete mixture as

Potential Use Of Plastic Waste As Construction Materials

Recycling of plastic waste as valued added product such as concrete appears as one of promising solution for alternative use of plastic waste. This paper summarized recent progress on the development of concrete mixture which incorporates plastic wastes as partial aggregate replacement during concrete

Use Of Polyethylene Terephthalate Fibers For Strengthening

concrete mixes were produced with of cement, of fine aggregate and of coarse aggregate for a of 0.5. To achieve a better workability, superplasticizer dosage of 0.5 and by volume of water was used in the mix of M100 and M100-PET,

A REVIEW ON USING FIBERS MADE FROM WASTE PET

Fibers made from Waste PET Bottles in Concrete. International Journal of Civil Engineering Technology, 7(4), 2020, aggregate, incorporating short isolated Figure 1 PET bottles sales, Recycling

USB2 - Aggregate Using Recycled Plastics -

The present invention comprises an aggregate for use in cementitious building materials which-successfully incorporates plastic such as recycled plastic scrap of diverse types and a abrasive, inorganic grit particles. The plastic scrap is impregnated with a grit, such as sand, glass or other inorganic material. The plastic will then bond satisfactorily with a ark cementitious